The centrifuge is one of the most used instruments in any clinical lab. Picking the right laboratory centrifuge in Dubai depends on your tube sizes, daily volume and the tests you run. This six-step guide makes the decision simple.
Step 1: Know Your Application
- Serum and plasma separation: low-speed centrifuges are the standard choice.
- Urine sediment: low-speed models with suitable tubes.
- PRP preparation: dedicated programmable units. See our PRP centrifuge guide.
- Cytology: specialised models such as the cyto low-speed centrifuge.
Step 2: Match Tube Size and Capacity
Count how many tubes you spin at once at peak times and what size they are.
| Daily Volume | Suggested Models |
|---|---|
| Small clinic | 800D centrifuge, LC-04R 800D, LC-04R 6-tube |
| Medium lab | 12-tube LC-04B, 80-2B, LC-04P |
| Busy diagnostic lab | LC-04S-C, LC-06C |
| High volume / blood bags | TDL-5G / 5G Plus |
Step 3: Choose the Rotor Type
- Angle rotor: faster pelleting, compact. Common for routine tubes.
- Swing-out rotor: tubes swing horizontal, giving a flat separation layer, useful for blood separation and larger volumes.
Step 4: Check Speed and RCF
Protocols specify relative centrifugal force (RCF, in × g) rather than RPM, because RCF depends on rotor radius. Make sure the centrifuge can reach the RCF your tests require and displays it.
Step 5: Safety Features
- Lid interlock that prevents opening while spinning.
- Imbalance detection with automatic stop.
- Over-speed protection.
- Sealed buckets for potentially infectious samples.
Step 6: Digital Controls and Programs
Digital timers and stored programs reduce errors and keep results consistent between staff.
Daily Use Tips
- Always balance tubes opposite each other with equal volume.
- Wait for the rotor to stop completely before opening.
- Clean spills immediately and disinfect buckets regularly.
- Include centrifuges in your PPM / AMC plan for speed verification.
Laboratory Centrifuge Safety and Biosafety
A laboratory centrifuge can create aerosols if a tube breaks or leaks during a run. Using sealed buckets or caps for potentially infectious samples, and waiting a few minutes before opening after a breakage, reduces exposure risk. Staff should know the spill procedure and where the disinfectant and PPE are kept.
Inspect tubes for cracks before loading and never exceed the tube manufacturer’s rated force. Check rotors and buckets regularly for corrosion or damage and replace them if needed.
The World Health Organization Laboratory Biosafety Manual is the international reference for safe centrifuge practice and is worth sharing with every member of your lab team.
Frequently Asked Questions
What is the difference between RPM and RCF?
RPM is rotation speed; RCF is the actual force on the sample, which depends on rotor size. Protocols usually specify RCF.
Which centrifuge is best for a small clinic?
A compact low-speed model like the 800D or LC-04R usually covers routine serum separation.
Do you supply replacement tubes and adapters?
Ask our team about adapters for your model. Contact us.
Find Your Centrifuge Today
Bionex Medical is a trusted medical equipment supplier in Dubai. Compare every centrifuge in our laboratory equipment range or WhatsApp us.
